Transforming Adolescent Smiles: Correcting Skeletal Mandibular Retrusion and Bimaxillary Protrusion with Clear Aligners.

Maxillary protrusion combined with mandibular retraction is a highly prevalent but extremely complex maxillofacial deformity that can have a serious negative impact on patients' facial aesthetics and mental health. The traditional orthodontic treatment strategy often involves extracting 4 first premolars and conventional fixed techniques, combined with mini-implant screws, to retract the anterior teeth and improve facial protrusion. In recent years, an invisible orthodontic technique, without brackets, has become increasingly popular. However, while an invisible aligner has been used in some cases with reasonable results, there remain significant challenges in achieving a perfect outcome. This case report presents an adolescent patient with bimaxillary protrusion and mandibular retrognathia. Based on the characteristics of the invisible aligners and the growth characteristics of the adolescent's teeth and jawbone, we designed precise three-dimensional tooth movement and corresponding resistance/over-correction for each tooth, while utilizing the patient's jawbone growth potential to promote rapid development of the mandible, accurately and efficiently correcting bimaxillary protrusion and skeletal mandibular retrognathia. The patient's facial aesthetics, especially the lateral morphology, have been greatly improved, and various aesthetic indicators have also shown significant changes, and to the patient's great benefit, invasive mini-implant screws were not used during the treatment. This case highlights the advantages of using invisible aligners in adolescent maxillary protrusion combined with mandibular retraction patients. Furthermore, comprehensive and accurate design combined with good application of growth potential can also enable invisible orthodontic technology to achieve perfect treatment effects in tooth extractions, providing clinical guidance for orthodontists.

Hypo-attenuating Berry Sign as a Novel Imaging Marker of Ruptured Aneurysm in Patients with Subarachnoid Hemorrhage; a Diagnostic Accuracy Study.

Introduction: Aneurysmal subarachnoid hemorrhage (SAH) constitutes a life-threatening condition, and identifying the ruptured aneurysm is essential for further therapy. This study aimed to evaluate the diagnostic accuracy of hypo-attenuating berry sign (HBS) observed on computed tomography (CT) scan in distinguishing ruptured aneurysms. Methods: In this diagnostic accuracy study, patients who had SAH and underwent non-enhanced brain CT scan were recruited. The HBS was defined as a hypo-attenuating area with an identifiable border in the blood-filled hyper-dense subarachnoid space. The screening performance characteristics of HBS in identifying ruptured aneurysms were calculated considering the digital subtraction angiography (DSA) as the gold standard. Results: A total of 129 aneurysms in 131 patients were analyzed. The overall sensitivity and specificity of HBS in the diagnosis of aneurysms were determined to be 78.7% (95%CI: 73.1% - 83.4%) and 70.7% (95%CI: 54.3% - 83.4%), respectively. Notably, the sensitivity increased to 90.9% (95%CI: 84.3% - 95.0%) for aneurysms larger than 5mm. The level of inter-observer agreement for assessing the presence of HBS was found to be substantial (kappa=0.734). The diagnostic accuracy of HBS in individuals exhibited enhanced specificity, sensitivity, and reliability when evaluating patients with a solitary aneurysm or assessing ruptured aneurysms. The multivariate logistic regression analysis revealed a statistically significant relationship between aneurysm size and the presence of HBS (odds ratios of 1.667 (95%CI: 1.238 - 2.244; p < 0.001) and 1.696 (95%CI: 1.231 - 2.335; p = 0.001) for reader 1 and reader 2, respectively). Conclusions: The HBS can serve as a simple and easy-to-use indicator for identifying a ruptured aneurysm and estimating its size in SAH patients.  .

Iron modified hydrogen-bonded organic framework as fluorescent sensor for ascorbic acid detection.

Herein, iron modified hydrogen-bonded organic framework (Fe-HOF) was successfully prepared by introducing the yellow-green fluorescent ligand 2,5-dihydroxyterephthalic acid into HOF and then modifying Fe3+. A simple turn-on fluorescence strategy is proposed for the detection of ascorbic acid (AA) based on Fe-HOF. Fe3+ could effectively quench fluorescence emission of HOF. In the presence of AA, Fe3+ was reduced to Fe2+, which led to the fluorescence recovery of HOF, thus realizing the fluorescence quantitative detection of AA. These fluorescence responsive behaviors of Fe-HOF ensure fluorescence assay of AA within 0.5 - 8 µM, along with a limit of detection (LOD) of 0.14 µM. The sensing platform could realize the rapid detection of ascorbic acid in vitamin C pills, tablets and beverages in the detection of ascorbic acid with good recoveries.

Redox-neutral electrochemical decontamination of hypersaline wastewater with high technology readiness level.

Industrial hypersaline wastewaters contain diverse pollutants that harm the environment. Recovering clean water, alkali and acid from these wastewaters can promote circular economy and environmental protection. However, current electrochemical and advanced oxidation processes, which rely on hydroxyl radicals to degrade organic compounds, are inefficient and energy intensive. Here we report a flow-through redox-neutral electrochemical reactor (FRER) that effectively removes organic contaminants from hypersaline wastewaters via the chlorination-dehalogenation-hydroxylation route involving radical-radical cross-coupling. Bench-scale experiments demonstrate that the FRER achieves over 75% removal of total organic carbon across various compounds, and it maintains decontamination performance for over 360 h and continuously treats real hypersaline wastewaters for two months without corrosion. Integrating the FRER with electrodialysis reduces operating costs by 63.3% and CO2 emissions by 82.6% when compared with traditional multi-effect evaporation-crystallization techniques, placing our system at technology readiness levels of 7-8. The desalinated water, high-purity NaOH (>95%) and acid produced offset industrial production activities and thus support global sustainable development objectives.

Tensorized Multi-View Low-Rank Approximation Based Robust Hand-Print Recognition.

Since hand-print recognition, i.e., palmprint, finger-knuckle-print (FKP), and hand-vein, have significant superiority in user convenience and hygiene, it has attracted greater enthusiasm from researchers. Seeking to handle the long-standing interference factors, i.e., noise, rotation, shadow, in hand-print images, multi-view hand-print representation has been proposed to enhance the feature expression by exploiting multiple characteristics from diverse views. However, the existing methods usually ignore the high-order correlations between different views or fuse very limited types of features. To tackle these issues, in this paper, we present a novel tensorized multi-view low-rank approximation based robust hand-print recognition method (TMLA_RHR), which can dexterously manipulate the multi-view hand-print features to produce a high-compact feature representation. To achieve this goal, we formulate TMLA_RHR by two key components, i.e., aligned structure regression loss and tensorized low-rank approximation, in a joint learning model. Specifically, we treat the low-rank representation matrices of different views as a tensor, which is regularized with a low-rank constraint. It models the across information between different views and reduces the redundancy of the learned sub-space representations. Experimental results on eight real-world hand-print databases prove the superiority of the proposed method in comparison with other state-of-the-art related works.

Integrative analysis of single-cell and bulk RNA sequencing unveils a machine learning-based pan-cancer major histocompatibility complex-related signature for predicting immunotherapy efficacy.

Major histocompatibility complex (MHC) could serve as a potential biomarker for tumor immunotherapy, however, it is not yet known whether MHC could distinguish potential beneficiaries. Single-cell RNA sequencing datasets derived from patients with immunotherapy were collected to elucidate the association between MHC and immunotherapy response. A novel MHCsig was developed and validated using large-scale pan-cancer data, including The Cancer Genome Atlas and immunotherapy cohorts. The therapeutic value of MHCsig was further explored using 17 CRISPR/Cas9 datasets. MHC-related genes were associated with drug resistance and MHCsig was significantly and positively associated with immunotherapy response and total mutational burden. Remarkably, MHCsig significantly enriched 6% top-ranked genes, which were potential therapeutic targets. Moreover, we generated Hub-MHCsig, which was associated with survival and disease-special survival of pan-cancer, especially low-grade glioma. This result was also confirmed in cell lines and in our own clinical cohort. Later low-grade glioma-related Hub-MHCsig was established and the regulatory network was constructed. We provided conclusive clinical evidence regarding the association between MHCsig and immunotherapy response. We developed MHCsig, which could effectively predict the benefits of immunotherapy for multiple tumors. Further exploration of MHCsig revealed some potential therapeutic targets and regulatory networks.

Exosomes loaded a smart bilayer-hydrogel scaffold with ROS-scavenging and macrophage-reprogramming properties for repairing cartilage defect.

Enhancing the regeneration of cartilage defects remains challenging owing to limited innate self-healing as well as acute inflammation arising from the overexpression of reactive oxygen species (ROS) in post-traumatic microenvironments. Recently, stem cell-derived exosomes (Exos) have been developed as potential cell-free therapy for cartilage regeneration. Although this approach promotes chondrogenesis, it neglects the emerging inflammatory microenvironment. In this study, a smart bilayer-hydrogel dual-loaded with sodium diclofenac (DC), an anti-inflammatory drug, and Exos from bone marrow-derived mesenchymal stem cells was developed to mitigate initial-stage inflammation and promote late-stage stem-cell recruitment and chondrogenic differentiation. First, the upper-hydrogel composed of phenylboronic-acid-crosslinked polyvinyl alcohol degrades in response to elevated levels of ROS to release DC, which mitigates oxidative stress, thus reprogramming macrophages to the pro-healing state. Subsequently, Exos are slowly released from the lower-hydrogel composed of hyaluronic acid into an optimal microenvironment for the stimulation of chondrogenesis. Both in vitro and in vivo assays confirmed that the dual-loaded bilayer-hydrogel reduced post-traumatic inflammation and enhanced cartilage regeneration by effectively scavenging ROS and reprogramming macrophages. The proposed platform provides multi-staged therapy, which allows for the optimal harnessing of Exos as a therapeutic for cartilage regeneration.

Integrative analyses of bulk and single-cell transcriptomics reveals the infiltration and crosstalk of cancer-associated fibroblasts as a novel predictor for prognosis and microenvironment remodeling in intrahepatic cholangiocarcinoma.

BACKGROUND: Intrahepatic cholangiocarcinoma (ICC) is a highly malignant neoplasm and characterized by desmoplastic matrix. The heterogeneity and crosstalk of tumor microenvironment remain incompletely understood. METHODS: To address this gap, we performed Weighted Gene Co-expression Network Analysis (WGCNA) to identify and construct a cancer associated fibroblasts (CAFs) infiltration biomarker. We also depicted the intercellular communication network and important receptor-ligand complexes using the single-cell transcriptomics analysis of tumor and Adjacent normal tissue. RESULTS: Through the intersection of TCGA DEGs and WGCNA module genes, 784 differential genes related to CAFs infiltration were obtained. After a series of regression analyses, the CAFs score was generated by integrating the expressions of EVA1A, APBA2, LRRTM4, GOLGA8M, BPIFB2, and their corresponding coefficients. In the TCGA-CHOL, GSE89748, and 107,943 cohorts, the high CAFs score group showed unfavorable survival prognosis (p < 0.001, p = 0.0074, p = 0.028, respectively). Additionally, a series of drugs have been predicted to be more sensitive to the high-risk group (p < 0.05). Subsequent to dimension reduction and clustering, thirteen clusters were identified to construct the single-cell atlas. Cell-cell interaction analysis unveiled significant enhancement of signal transduction in tumor tissues, particularly from fibroblasts to malignant cells via diverse pathways. Moreover, SCENIC analysis indicated that HOXA5, WT1, and LHX2 are fibroblast specific motifs. CONCLUSIONS: This study reveals the key role of fibroblasts - oncocytes interaction in the remodeling of the immunosuppressive microenvironment in intrahepatic cholangiocarcinoma. Subsequently, it may trigger cascade activation of downstream signaling pathways such as PI3K-AKT and Notch in tumor, thus initiating tumorigenesis. Targeted drugs aimed at disrupting fibroblasts-tumor cell interaction, along with associated enrichment pathways, show potential in mitigating the immunosuppressive microenvironment that facilitates tumor progression.

Patterns, Risk Factors, and Outcomes of Recurrence After Hepatectomy for Hepatocellular Carcinoma with and without Microvascular Invasion.

Purpose: The patterns and risk factors of postsurgical recurrence of patient with hepatocellular carcinoma (HCC) with microvascular invasion (MVI) are not clarified. This study aimed to decipher and compare the postoperative recurrent patterns and the risk factors contributing to recurrence between MVI positive (MVI(+)) and MVI negative (MVI(-)) HCC after hepatectomy. Patients and methods: Patients with HCC who underwent hepatectomy in three Chinese academic hospitals between January 1, 2009, and December 31, 2018, were enrolled. Recurrent patterns included early (≤2 years) or late (>2 years) recurrence, recurrent sites and number, and risk factors of recurrence were compared between the MVI(+)and MVI(-) groups by propensity score-matching (PSM). Results: Of 1756 patients included, 581 (33.1%) were MVI(+), and 875 (49.8%) patients developed early recurrence. Compared with the MVI(-) group, the MVI(+) group had a higher 2-year recurrence rate in the PSM cohort (hazard ratio [HR], 1.82; 95% confidence interval [CI], 1.59-2.10; P < 0.001), and more patients with multiple tumor recurrence. Patients with early recurrence in the MVI(+) group had a worse overall survival (OS) than those in the MVI(-) group (HR, 1.24; 95% CI, 1.02-1.50; P = 0.034). Resection margin (RM) ≤1.0 cm is a surgical predictor of early recurrence for the MVI(+) group (HR, 0.68; 95% CI, 0.54-0.87; P = 0.002), but not for the MVI(-) group. Conclusion: Compared to MVI(-) HCC, MVI(+) HCC tends to be early, multiple recurrence and lung and lymph node metastasis after resection. RM ≤1.0 cm is a surgical risk factor of early recurrence for patient with MVI.

Association between pretreatment emotional distress and immune checkpoint inhibitor response in non-small-cell lung cancer.

Emotional distress (ED), commonly characterized by symptoms of depression and/or anxiety, is prevalent in patients with cancer. Preclinical studies suggest that ED can impair antitumor immune responses, but few clinical studies have explored its relationship with response to immune checkpoint inhibitors (ICIs). Here we report results from cohort 1 of the prospective observational STRESS-LUNG study, which investigated the association between ED and clinical efficacy of first-line treatment of ICIs in patients with advanced non-small-cell lung cancer. ED was assessed by Patient Health Questionnaire-9 and Generalized Anxiety Disorder 7-item scale. The study included 227 patients with 111 (48.9%) exhibiting ED who presented depression (Patient Health Questionnaire-9 score ≥5) and/or anxiety (Generalized Anxiety Disorder 7-item score ≥5) symptoms at baseline. On the primary endpoint analysis, patients with baseline ED exhibited a significantly shorter median progression-free survival compared with those without ED (7.9 months versus 15.5 months, hazard ratio 1.73, 95% confidence interval 1.23 to 2.43, P = 0.002). On the secondary endpoint analysis, ED was associated with lower objective response rate (46.8% versus 62.1%, odds ratio 0.54, P = 0.022), reduced 2-year overall survival rate of 46.5% versus 64.9% (hazard ratio for death 1.82, 95% confidence interval 1.12 to 2.97, P = 0.016) and detriments in quality of life. The exploratory analysis indicated that the ED group showed elevated blood cortisol levels, which was associated with adverse survival outcomes. This study suggests that there is an association between ED and worse clinical outcomes in patients with advanced non-small-cell lung cancer treated with ICIs, highlighting the potential significance of addressing ED in cancer management. ClinicalTrials.gov registration: NCT05477979 .

Diagnostic performance of acoustic radiation force impulse for acute pancreatitis: A meta-analysis.

OBJECTIVE: The objective of this meta-analysis is to evaluate the diagnostic performance of acoustic radiation force impulse (ARFI) in acute pancreatitis (AP) patients. METHODS: PubMed, Web of Science, Embase, Wanfang, Chinese Biological Medicine databases, and Chinese Biomedical Literature Service System were searched for relevant studies to explore the potential diagnostic performance of ARFI in AP from inception to November 2023. STATA 14.0 was used to analyze the standardized mean difference (SMD) with 95% confidence interval (CI), pooled sensitivity, specificity, area under the curve, meta-regression analysis, sensitivity analysis, and publication bias. RESULTS: Nine studies, involving 533 AP patients and 585 healthy controls, were included. AP patients had significantly higher ARFI levels than healthy controls (SMD: 3.13, 95% CI: 1.88-4.39, P = .001). The area under the curve of ARFI for diagnosing AP was 0.99 (95% CI: 0.98-1.00), with 98% sensitivity and 94% specificity. Meta-regression identified the study region and study period as the sources of heterogeneity. Sensitivity analysis showed that the exclusion of any single study did not materially alter the overall combined effect. No evidence of publication bias was observed in the included studies. CONCLUSION: This meta-analysis demonstrated that ARFI exerted satisfactory diagnostic performance in AP.

Nitrate transformation and source tracking of Yarlung Tsangpo River using a multi-tracer approach combined with Bayesian stable isotope mixing model.

Excessive levels of nitrate nitrogen (NO3--N) could lead to ecological issues, particularly in the Yarlung Tsangpo River (YTR) region located on the Qinghai Tibet Plateau. Therefore, it is crucial to understand the fate and sources of nitrogen to facilitate pollution mitigation efforts. Herein, multiple isotopes and source resolution models were applied to analyze key transformation processes and quantify the sources of NO3-. The δ15N-NO3- and δ18O-NO3- isotopic compositions in the YTR varied between 1.23‰ and 13.64‰ and -7.88‰-11.19‰, respectively. The NO3--N concentrations varied from 0.08 to -0.86 mg/L in the dry season and 0.20-1.19 mg/L during the wet season. Nitrification remained the primary process for nitrogen transformation in both seasons. However, the wet season had a widespread effect on increasing nitrate levels, while denitrification had a limited ability to reduce nitrate. The elevated nitrate concentrations during the flood season were caused by increased release of NO3- from manure & sewage (M&S) and chemical fertilizers (CF). Future endeavors should prioritize enhancing management strategies to improve the utilization efficiency of CF and hinder the direct entry of untreated sewage into the water system.

[Optimization of prediction model for personalized water pills based on semantic analysis of traditional Chinese medicine materials].

This study aims to optimize the prediction model of personalized water pills that has been established by our research group. Dioscoreae Rhizoma, Leonuri Herba, Codonopsis Radix, Armeniacae Semen Amarum, and calcined Oyster were selected as model medicines of powdery, fibrous, sugary, oily, and brittle materials, respectively. The model prescriptions were obtained by uniform mixing design. With hydroxypropyl methylcellulose E5(HPMC-E5) aqueous solution as the adhesive, personalized water pills were prepared by extrusion and spheronizaition. The evaluation indexes in the pill preparation process and the multi-model statistical analysis were employed to optimize and evaluate the prediction model of personalized water pills. The prediction equation of the adhesive concentration was obtained as follows: Y_1=-4.172+3.63X_A+15.057X_B+1.838X_C-0.997X_D(adhesive concentration of 10% when Y_1<0, and 20% when Y_1>0). The overall accuracy of the prediction model for adhesive concentration was 96.0%. The prediction equation of adhesive dosage was Y_2=6.051+94.944X_A~(1.5)+161.977X_B+70.078X_C~2+12.016X_D~(0.3)+27.493X_E~(0.3)-2.168X_F~(-1)(R~2=0.954, P<0.001). Furthermore, the semantic prediction model for material classification of traditional Chinese medicines was used to classify the materials contained in the prescription, and thus the prediction model of personalized water pills was evaluated. The results showed that the prescriptions for model evaluation can be prepared with one-time molding, and the forming quality was better than that established by the research group earlier. This study has achieved the optimization of the prediction model of personalized water pills.

[Composite excipients for preparing concentrated water pills of personalized traditional Chinese medicine prescriptions by extruding-rounding method].

This study aims to optimize the composite excipients suitable for the preparation of concentrated water pills of personalized traditional Chinese medicine prescriptions by the extruding-rounding method and investigate the roles of each excipient in the preparation process. The fiber materials and powder materials were taken as the standard materials suitable as excipients in the preparation of personalized concentrated water pills without excipient. Water absorption properties and torque rheology were used as indicators for selecting the materials of composite excipients. The ratio of composite excipients was optimized by D-optimal mixture design. Moreover, to demonstrate the universal applicability of the optimal composite excipients, this study selected three traditional Chinese medicine prescriptions with low, medium, and high extraction rates to verify the optimal ratio. Finally, the effects of each selected excipient on the molding of personalized concentrated water pills were investigated with the four parameters of the pill molding quality as indicators. The optimized composite excipients were dextrin∶microcrystalline cellulose(MCC)∶low-substituted hydroxypropyl cellulose(L-HPC) at a ratio of 1∶2∶4. The composite excipients were used for the preparation of personalized concentrated water pills with stable process, good quality, and a wide range of application. Dextrin acted as a diluent and accelerated the speed of extruding. MCC mainly served as an adhesive, increasing the cohesion and viscosity of the pills. L-HPC as a water absorbent and disintegrating agent can absorb and hold the water of the concentrate and has a strong disintegration effect.

[Research practice and development direction of intelligent manufacturing of presonalized traditional Chinese medicine preparations].

In recent years, as people's living standards continue to improve, and the pace of life accelerates dramatically, the demand and quality of traditional Chinese medicine(TCM) services from patients continue to rise. As an essential supplement to the existing forms of TCM application, such as Chinese patent medicine, decoction, and formulated granules, presonalized TCM preparations is facing an increasing market demand. Currently, manual and semi-mechanized production are the primary production ways in presonalized TCM preparations. However, the production process control level is low, and digitalization and informatization need to be improved, which restricts the automated and intelligent development of presonalized TCM preparations. Presonalized TCM preparations faces a significant opportunity and challenge in integrating with intelligent manufacturing through research and development of intelligent equipment and core technology. This paper overviews the connotation and characteristics of intelligent manufacturing and summarizes the application of intelligent manufacturing technologies such as "Internet of things" "big data", and "artificial intelligence" in the TCM industry. Based on the innovative research and development model of "intelligent classification of TCM materials, intelligent decision making of prescription and process, and online control and intelligent production" of presonalized TCM preparations, the research practice and achievements from our research group in the field of intelligent manufacturing of presonalized TCM preparations are introduced. Ultimately, the paper proposes the direction for developing intelligent manufacturing of presonalized TCM preparations, which will provide a reference for the research and application of automation and intelligence of presonalized TCM preparations.

[Molding law of traditional Chinese medicine gel plaster based on physicochemical properties of raw materials and intermediates].

This paper aims to study the correlation between the physicochemical properties of raw materials and intermediates and the molding quality and law of traditional Chinese medicine(TCM) gel plaster by using TCM slices and powder as raw materials. 48 TCM compounds are selected as model prescriptions to prepare gel plasters. The rotational rheometer is used to determine the rheological parameters of the plaster, including storage modulus(G'), loss modulus(G″), yield stress(τ), and creep compliance [J(t)]. The molding quality of the prepared TCM gel plaster is evaluated by subjective and objective measures. Clustering and principal component analysis are conducted to evaluate the physical properties of the plaster. By measuring the rheological properties of the plaster, the molding quality of the TCM gel plaster can be predicted, with an accuracy of 83.72% after seven days of modeling and 88.37% after 30 days of modeling. When the parameters such as G' and G″ of the plaster are large, and the [J(t)] is small, the molding quality of the plaster is better. When the plaster coating point is no less than 3, it is difficult to be coated. In addition, when the proportion of metal ions in the prescription is higher, the 30-day forming quality of the plaster is mainly affected, and the viscosity of the plaster is poor. If the prescription contains many acidic chemical components, the 7-day forming quality of the plaster is mainly affected, with many residuals. The results suggest that the rheological properties of the plaster can be used to predict the molding quality of TCM slice and powder gel plaster. It can provide a reference for the development of TCM gel plaster prescriptions.

[Intelligent material classification of traditional Chinese medicine based on semantic analysis].

A method for material classification of traditional Chinese medicines based on the physical properties of powder has been established by our research group. This method involves pre-treatment of traditional Chinese medicine decoction pieces, powder preparation, and determination of physical properties, being cumbersome. In this study, the word segmentation logic of semantic analysis was adopted to establish the thesaurus and local standardized semantic word segmentation database with the macroscopic and microscopic characteristics of 36 model traditional Chinese medicines as the basic data. The physical properties of these medicines have been determined and the classification of these medicines is clear in the cluster analysis. A total of 55 keywords for powdery, fibrous, sugary, oily, and brittle materials were screened by association rules and the set inclusion and exclusion criteria, and the weights of the keywords were calculated. Furthermore, the algorithms of the keyword matching scores and the computation rules of the single or multiple material classification were established for building the intelligent model of semantic analysis for the material classification. The semantic classification results of the other 35 TCMs except Pseudostellariae Radix(multi-material medicine) agreed with the clustering results based on the physical properties of the powder, with an agreement rate of 97.22%. In model validation, the prediction results of semantic classification of traditional Chinese medicines were consistent with the clustering results based on the physical properties of powder, with an agreement rate of 83.33%. The results showed that the method of material classification based on semantic analysis was feasible, which laid a foundation for the development of intelligent decision-making technology for personalized traditional Chinese medicine preparations.

[Molding matrix formulation of hot-melt pressure-sensitive adhesive plaster of personalized traditional Chinese medicine preparations].

This study aims to optimize the matrix formulation for the hot-melt pressure-sensitive adhesive plaster of personalized traditional Chinese medicine(TCM) preparations and verify the applicability of the formulation. The central composite design in JMP Pro 16.1.0 was employed to optimize the dosages of styrene-isoprene-styrene triblock copolymer(SIS), hydrogenated petroleum resin, and lightweight liquid paraffin, with the fine powder of Yipifang as the model drug(drug loading of 10%) and the sensory score and objective evaluation as the comprehensive evaluation indicators. The quality evaluation system of hot-melt pressure-sensitive adhesive plaster of personalized TCM preparations was established. The applicability of the optimized matrix formulation of hot-melt pressure-sensitive adhesive plaster was verified with 16 TCM preparations for external application. Furthermore, the applicability of the matrix formulation was investigated with different drug loadings. The general molding matrix formulation was SIS∶hydrogenated petroleum resin∶lightweight liquid paraffin 3∶3∶5. The optimized matrix formulation showed good molding properties and high quality scores for 16 TCM preparations and were suitable for the plastering of finely powdered decoction pieces with a loading capacity of 10% to 30%. The results suggest that the optimized matrix formulation has good applicability and is suitable for TCM preparations. The findings lay a foundation for the application and promotion of the hot-melt pressure-sensitive adhesive plasters of personalized TCM preparations.

[Preparation process selection of presonalized traditional Chinese medicine concentrated watered pills containing heat-unstable components].

In the process of preparing presonalized concentrated watered pills, the decoction needs to be concentrated by heat and mixed with medicinal slices or powder to prepare a wet mass. However, some of the traditional Chinese medicine(TCM) components are easily decomposed or transformed by heat. In order to optimize the preparation process of presonalized TCM concentrated watered pills and reduce the loss of heat-unstable components in prescriptions, this study uses five compound TCM prescriptions containing heat-unstable components as model prescriptions, namely the Linggui Zhugan Formula, Xiaochengqi Formula, Sanpian Formula, Xiaoer Qixing Formula, and Xiaoyao Formula. Based on the two kinds of preparation process of presonalized concentrated watered pills previously established by our research group, whole extract concentrated watered pills and concentrated watered pills without excipients are prepared, respectively. Characteristic maps are measured and compared with those of the corresponding decoction. The results show that the characteristic maps of the concentrated watered pills without excipients of the five model prescriptions are very close to those of the decoction, and the number of characteristic peaks and peak areas are higher than those of whole extract concentrated watered pills. In addition, the peak area of some peaks is higher than that of the corresponding decoction. Thus, it is recommended to select the preparation process of prescription-based concentrated watered pills without excipients based on the "unification of medicines and excipients" to preserve those heat-unstable components more effectively when the prescription contains a heat-unstable component of TCM. This study provides a basis for the subsequent reasonable development and application of presonalized TCM pills.

Synthesis of Asp-based lactam cyclic peptides using an amide-bonded diaminodiacid to prevent aspartimide formation.

Asp-based lactam cyclic peptides are considered promising drug candidates. However, using Fmoc solid-phase peptide synthesis (Fmoc-SPPS) for these peptides also causes aspartimide formation, resulting in low yields or even failure to obtain the target peptides. Here, we developed a diaminodiacid containing an amide bond as a ß-carboxyl-protecting group for Asp to avoid aspartimide formation. The practicality of this diaminodiacid has been illustrated by the synthesis of lactam cyclic peptide cyclo[Lys9,Asp13] KIIIA7-14 and 1Y.